15 Ways to Save Water in the Home

Droughts are nothing new but more areas are struggling with water issues. Water conservation has become more important than ever before, even in areas where water seemed abundant previously.

Water conservation has many benefits most notably lowering your water bill, preventing water pollution in nearby lakes, rivers, and local watersheds. Whether you’re ready to reduce your shower time or replace your toilets, there are lots of ways to conserve water.

We have compiled 15 ways you can conserve water within your home and cut down your water bill. It can be a daunting task to conserve water but there’s no need to get overwhelmed. Simply make a few changes and you can end up saving up to a few hundreds of gallons of water each year.

15 Water Saving Tips

If it’s yellow, let it mellow. Sure this may not be for everyone, but toilets use the most water in the household. Save water by not flushing all the time! If it’s yellow let it sit. If it is solid waste flush it down.

Address Those Pesky Leaks. Whether you go DIY or hire a plumber, be proactive and fix those leaky faucets and rake in those water savings.

Don’t Use The Toilet as a Wastebasket. Sure, we all do it from time to time but don’t flush trash, tissue or paper down the toilet. You can waste up to five to seven gallons of water per flush.

Rinse your Razor in the Sink. First, fill the sink with a few inches of warm water. This will rinse your razor just as well as running water and cut down on water waste.

Don’t Let The Faucet Run While You Clean Vegetables. Fill your sink up or a pan with clean water and clean off your veggies.

Don’t Run the Hose While Washing Your Car. Only use the hose for rinsing your car. This simple tactic can save as much as 150 gallons when washing your car. For extra benefits, use a spray nozzle when rinsing your car for more efficient use of water.

Use a Broom, Not a Hose. When cleaning driveways and sidewalks use a broom instead of a water hose to clean your driveway.

Invest In A Watering Can. Rather than using a hosepipe which can waste up to 264 gallons per hour. Also, mulching your plants and watering in the early morning and late afternoon will reduce evaporation and save water.

Collect Your Shower Water. While you sit and wait for your water to heat up collect the cold water in a bucket and repurpose it.

Turn Off The Water. Turn off the water while you’re washing your hair. This alone can save you up to 150 gallons per month.

Plug The Bathtub. Before you even turn the water on, plug the bathtub before turning on the water.

Report Broken Pipes. If you notice broken pipes or leaky fire hydrants report it to your local water provider.

Join A Community Pool. Instead of building a private pool, join a community pool.

Compost Regularly. Use the garbage disposal sparingly. Instead, compost vegetable food waste and save gallons every time.

Use Minimal Water While Cooking. When you are cooking food try to use as little water as possible. This also helps your food retain more nutrients.

Water Stress Conditions

Did you know that in 1990, 30 states in the U.S. reported ‘water-stress’ conditions. In 2000, the number of states reporting water-stress rose to 40 states. In 2009, the number rose to 45 states. There is a growing trend of water related shortages nationwide. By taking measures at home to conserve water not only saves you money, it benefits the greater community at large.

Water conservation at home doesn’t require you to incur any significant costs. You can take advantage of the tips above to reduce your water usage.

Toilet Tank Parts

Not knowing how your toilet works can be a major issue that can turn into a disgusting problem quick. It pays dividends to properly get acquainted with your bathrooms Most Valuable Player!

How Does a Toilet Work?

Often times we take having a toilet for granted. It’s easy to forget that not too long ago having a running toilet was a luxury. Let’s take a look at how the components of a toilet tank work should you need to diagnose an issue.

Bowl Siphon: 

Despite having no moving parts, the toilet bowl features a highly functioning design. The toilet bowl is attached to a pipe with a U-bend that leads into the sewer system. As water and waste leave the bowl on flush, air rushes causing the “flush” sound. The air coming into the bowl stops the siphoning process. The bowl is then refilled with water.

Toilet Tank
The toilet tank is located in the upper part of the toilet and holds about 2 gallons of clean water. More importantly, the tank can send the water fast enough through the bowl to activate the siphon effect and send waste down the pipe! By pushing the handle down, the tank system is activated causing water to dump into the bowl triggering the flush.

More On Toilet Tank Parts & Their Functions:

Flapper Valve: A flapper valve creates a watertight seal in the tank. This valve holds the water before and after a toilet flush. When you push the handle, the flapper rises and this allows water to flush out the waste.
Refill Tube: The refill tube is located above the overflow tube. When it is pushed down into the overflow tube it can siphon water from the tank into the bowl causing the fill valve to cycle on and off.
Float: There are two types of floats for conventional toilets. Older toilets tend to have a large plastic or brass ball that is connected to a horizontal rod. This rod is connected to the toilet fill valve. The other style of a float that moves up and down along the vertical pipe of the toilet fill valve.

Refill Tube & Overflow Tube
The refill and overflow tube work together to help keep water in the tank. The overflow tube empties directly into the toilet bowl below. The overflow tube refills the bowl after each flush.

Shut-Off Valve: The shutoff valve connects to copper plumbing pipes in one of two ways: compression fitting or sweat fitting.
Wax Seal: The wax ring on a toilet provides a soft, pliable seal between some of the harder components of a toilet system. Toilets are generally made of porcelain. The wax ring fits around the exit hole in the bottom of the fixture and rests on the flange. The flange sits atop of the drainpipe.

With this information, we hope you will be more confident addressing toilet issues that may arise in your home.

Water Saving Toilet vs. Regular Toilet

More than 47% of water use in the average American home occurs in the bathroom. Almost 25% of that water is being consumed by your toilet. Toilet use can vary significantly depending on their age. Older toilets use anywhere from 2.5 – 5 gallons all the way up to 7 gallons with every flush. However, federal plumbing standards now specify that new toilets can only use up to 1.6 gallons per flush.

Its true toilets account for the bulk of water use, by far more than any other water consuming product in your home. For example, you have an older toilet chances are it’s using a whopping 6 gallons per flush. You’re not only wasting water but you’re flushing your hard-earned cash down the drain.

Water Saving Toilet vs. Regular Toilet

So, how exactly does a high-efficiency toilet compare to a regular toilet?

New energy efficient toilets typically use about 1.6 gallons per flush. When you consider that your toilet may be flushed as many as 5 times per day you can easily use 15 – 35 gallons of water per day! With a high-efficiency toilet, you can save up to 28 gallons of water a week.

Over a year you can easily save up to thousands of gallons by simply converting your toilet. If for example, you have a large family then a high-efficiency toilet is certainly a must.

How much water toilets use per flush?

Type of Toilet Toilet Consumption (Gallons Per Flush) Average Flushes Per Day Estimated Gallons Used Per Person Per Year
Older 7 5 12,775
Older 5 5 9,125
Older 3.5 5 6,388
Regular 1.6 5 2,920
High-Efficient 1.28 5 2,336

Curious about how much water your toilet uses per flush?

Oftentimes, manufacturers will stamp their toilet’s water usage per flush on the inside of the tank. Or, you can find the water usage on the “neck” of the toilet bowl. If all else fails then determining the age of your toilet is the key to figuring out its water use. Plumbing standards passed in 1992 required that toilets use no more than 1.6 GPF, so if your toilet was installed prior to 1992, then it likely uses 3.5-7 GPF.

Conserving Water In The Bathroom

If you have an older toilet and buying a new one is currently out of the question then don’t worry there are other options to conserve water. You can convert your current toilet into a water-efficient toilet. You can use a water-saving kit or you can retrofit it. Our water-saving toilet kits have all the tools you need to convert your single-flush toilet into a high-efficient dual flush toilet.

20 Water Conservation Facts You Won’t Believe!

Why Should You Care About Water Conservation?

Currently, in America, we waste 1 trillion gallons of water each year. Often times it goes unnoticed it could be as simple as a leaky shower faucet or a running toilet. Which may not sound like much initially but these trouble areas can quickly add up.

Unfortunately, water is a limited resource and a growing worldwide population contributes to a growing global water crisis. Despite much of the planet being covered in water only 1% of it is usable. The rest is either ocean water or frozen. Water is a limited resource it is more important than ever to practice water conservation.

Water Sustainability Facts In The Home

1. A five-minute shower can use 25 to 50 gallons of water.

2. The average bath takes 36 gallons of water.

3. Shaving using a filled sink basin is approximately 1 gallon.

4. Outdoor watering with an average hose uses 10 gallons per minute.

5. Fix that leaky faucet! If left alone it can waste up to around 100 gallons of water a day!

6. An automatic dishwasher uses approximately 9 to 12 gallons of water while hand washing dishes can use up to 20 gallons.

7. In a year, the average American residence uses over 100,000 gallons of water.

8. The average faucet releases 2 gallons of water per minute.

9. At one drip per second, a faucet can leak 3,000 gallons in a year.

10. The first water pipes in the U.S. were made from hollowed logs.

Indirect Water Conservation Facts

When we think of water conservation and usage we rarely consider indirect usage from everything we eat, purchase and use on a daily basis.

I bet you didn’t realize up to 70 percent of the world’s freshwater is used for agriculture purposes. That means everything we eat plays an important impact on our water supply. Oddly enough every manufacturing process also consumes water. Imagine things like computers, cell phones, and clothes have an impact on our water supply as well.

  1. More than 1,300 gallons are required to produce a 12 oz. steak.
  2. It takes about 37 gallons of water to grow coffee beans and process them to make just one cup of coffee.
  3. About 6,800 gallons of water is required to grow a day’s food for a family of four.
  4. Current growth rates of agricultural demands on the world’s freshwater resources are unsustainable.
  5. It takes .26 gallons of water irrigate one calorie of food.
  6. It takes 2.6 gallons of water to make a sheet of paper.
  7. It takes 924 gallons of water to produce 2.2 pounds of rice.
  8. It takes 2,641 gallons of water to make a pair of jeans.
  9. It takes 52 gallons of water to produce one glass of pasteurized milk.
  10. It takes 39,090 gallons of water to manufacture a new car.

The Benefits Of Water Conservation

When we reduce the amount of water that gets wasted in our homes it helps protect wildlife and cut the energy needed for treating and pumping water for domestic uses. Better yet water conservation naturally yields way to reduce your household water bill.

It’s important to remember we can run out of water. Further excessive water usage takes a lot of energy, resources and time to purify and administer. For drought-stricken cities throughout the U.S., it may have to be pumped from hundreds of miles away. So, we at Water Saver believe if more people understand what goes into water, they’ll be more likely to conserve it.
How To Save Water In The Bathroom

Tackle Those Leaky Faucets and Shower Heads: According to a previous study, your leaky faucet could be wasting you 2,500 gallons of water per year. Implement a shower attachment that slows the flow of water so it doesn’t run while lathering. Making sure your faucets and shower heads aren’t leaking is a good first step to water conservation.
Turn Off Water While Brushing Your Teeth: I know what you’re thinking this is a no-brainer right..? Well, did you know standard bathroom faucets use 2.5 gallons of water per minute? By turning off the water while brushing your teeth you could save 5 gallons of water per day. You can potentially save hundreds of gallons of water per year.
Take Short Showers: We know how tempting it can be to those long hot showers during the winter time. But keep in mind that showers use 2.5 gallons of water per minute. By keeping your shower time to a minimum it saves a lot of water. Keep in mind bathrooms account for approximately 75% of the water used in our homes. By practicing water conservation in your bathroom you can dramatically save on your water bill each month.
How to Save Water in The Kitchen: If the bathroom accounts for 75% of the waste in the home the kitchen accounts for the other 20%.
Install an efficient low-flow faucet: Older faucets tend to flow at 5 gallons per minute. By simply getting a new faucet you can save 3.5 gallons every minute.
Stop Defrosting Food With Cold Water: This is very wasteful. Instead, plan ahead set your food out a day in advance in your refrigerator.
Save Water In The Dishwasher: Always run your dishwasher when it’s full. Even if you use a water efficient dishwasher it’s still important to wait until the appliance is full before turning it on. This is because the dishwasher always uses the same amount of water despite the size of the load. This is why you should only turn it on when you are running full loads.

On average 95% of the water entering our homes gets wasted. It’s important to remember water is not cheap or limitless. We have to use this natural resource wisely and diligently practice water conservation.

How To Save Water In The Kitchen

With the vast majority of our planet covered in water, it’s hard to believe we could ever have a scarcity. However, there are pockets of people throughout the world who experience water scarcity. People living in areas where water is scarce understand the importance of conservation. The good news is that we can get make a difference today by conserving water in the kitchen.

Everyday Water Conservation Begins In The Kitchen

When it comes to conserving water in the kitchen a few small steps can have a dramatic impact. Give these 10 best practices a try in your kitchen today to reduce water waste!

Always Run a Full Load In The Dishwasher

We get sometimes you just want to use your cereal bowl that’s currently resting in the dishwasher. But wait a minute before you press that button.

“The average dishwasher will use approximately 10 to 15 gallons of water per load.”

Remember dishwashers use their fair share of water, no matter how full they may be.

Don’t be fooled: A dripping faucet adds up!

Oh, I know what you’re thinking. I don’t need to fix that leaky tap just yet. It can wait until tomorrow… After all, it’s just a tiny drip. How much harm could it do?

Drip … Drip … drip

Besides being very annoying those drips can add up dramatically. For example, one household with 4 faucets that drip every minute could waste up to 138 gallons of water per year!

Invest in a Pitcher

Keep a container of drinking water in your refrigerator. A pitcher of water is ideal. With cold drinking water on hand, you’ll waste less than you would while waiting for the temperature to cool down.

Use The Right Amount of Water

When cooking, pay special attention to read the instructions. And only use the amount of water required. This reduces water waste while straining your food.

Repurpose Cooking Water

You can’t use just any type of cooking water. Only, unsalted cooking water (from pasta, potatoes or vegetables) can be repurposed to water plants. Of course, let it cool to room temperature first before transferring to plants.

Defrost that Food!

Zap your food in the microwave or let it thaw overnight. Avoid using running water to thaw your dinner.

Kick Your Water Bottle Habit

It takes 1.5 gallons to manufacturer one plastic water bottle (contents notwithstanding). Instead, get a water filter for your drinking water. This will help you save water in the kitchen.

Eat More Vegetables

Did you know it takes a considerable amount of water to produce agriculture?

In fact, agriculture is responsible for 80% of all water consumed.

Eating lower on the food chain is a good strategy for reducing the amount of water required to meet your dietary needs.

 

Ditch That Last Cup Of Coffee

Or, if satisfying your coffee fix is a must, opt for tea instead. Since coffee has one of the highest water footprints per pound! Think about this!

It takes about 37 gallons of water to grow the coffee beans and process them to make one cup of coffee.

Repurpose Raw Vegetable Waste

If you have space rather than tossing vegetable or fruit waste out, use it to compost!

Compost is spongy and absorbent. A hundred pounds of average soil (a 1×10-foot row tilled six inches deep) with a pound of compost mixed in will hold an additional 33 pounds (4 gallons) of water. Take the organic content to five pounds, and that hundred pounds of soil will hold nearly two hundred pounds (25 gallons) of water! Compost is an excellent way to increase the water holding power of root systems, which is vital to growth.

Do the environment a favor and give these 10 best practices a try to conserve water in the kitchen!

Recommended Reading: Water Conservation Facts You Never Knew Existed!

dual flush conversion kit – retrofit your existing toilet

You can convert any toilet to save water by using a dual flush conversion kit. We stock a range of universal dual flush conversion kits that you can install yourself with no mess or fuss in under 15 minutes.

Dual flush conversion kit – retrofit your existing toilet

Dual flush toilets have become increasingly popular because of the increasing awareness of environmental concerns, but also increasing financial pressure.  You can use a dual flush conversion kit to turn your existing toilet into a water saving toilet and reduce your utility bill at the end of each month. Dual flush toilets give you the option to perform a full flush for solid waste or a half flush for liquid waste. With this design, you’re not only conserving water, but by doing that you’re also saving money on your water bill.

Choosing the right dual flush conversion kit

There are dual flush conversion kits for all different makes and  types of toilets. You should choose the correct kit based on the size of the inside drain and the style of toilet and actuator that you have. Here is a tool to help you choose an appropriate kit: Help me choose a dual flush conversion kit.

Find a dual flush conversion kits:

water saving toilets – reduce, reuse, retrofit

Toilets use about 30% of the total water used in a household. An old style single flush toilet can use up to 13 liters of water in one flush. New, more water-efficient dual-flush water saving toilets use only 8-9 liters for a full flush and 4-5 liters with a reduced flush. A family of four can save a swimming pool of water a year by using a water saving toilets.

water saving toilets that reduce the amount used per flush (dual flush toilets)

Dual flush toilets have become incredibly popular in areas such as Asia, Europe, Australia, South Africa and are fast catching on in the States. Most toilets sold today include a dual flush option; one for flushing solid waste and one for liquid waste. Flushing liquid waste naturally will use much less water than flushing solid waste.

These toilets work differently from standard toilets. Where a standard toilet will use a siphoning method to get rid of the waste, a dual flush toilet has a larger trap way in the bottom of the bowl and pushes waste out. The latter uses much less water – under 4.5 liters is used for a short flush and about 9 liters for a long flush – and waste goes out more easily.

With this design, you’re not only conserving water, but by doing that you’re also saving money on your water bill. Dual flush toilets save almost 70% of the water that is typically required for a standard toilet, and replacing an older toilet would generate much more savings. With the rising cost of water and increasing concern for preserving our environment, it is easy to see why the dual-flush toilet is becoming so popular in our world today. Although these toilets cost slightly more than standard toilets, the price difference has narrowed significantly, you find that the long-term savings will quickly add up.

It is also possible to retrofit your existing toilets at home or at the office with a dual flush conversion kit and make.

water saving toilets that reuse grey water and or rain water to flush

Even greater savings can be achieved by recycling bath, shower, rain water (this is called grey water) to flush toilets. Soon legislation will force the installation of dual flush toilets in all new buildings in many countries around the world. On property upgrades or ownership changes on existing buildings, owners will be forced to replace old toilets with dual flush or convert the existing toilet to dual flush.

Browse our water saving toilets and water saving products:

help me choose

 

Sink aerator faucet for saving water

In general a faucet aerator (or tap aerator) is attached to the tip of modern indoor water faucets. Aerators create a no-splash stream and often delivering a mixture of water and air. A specially designed water saving sink aerator faucet can help you to use water more efficiently and reduce your utility bills.

How a water saving sink aerator faucet works

The water saving sink aerator faucet has a finger touch operated valve to switch the water on and off. This means you can turn on the water with your hands already in position under the stream. This prevents the wastage of water while you turn the knobs or adjust spigots to open and close the faucet. This provides a consistent water pressure and temperature for each usage. It also saves substantial amounts of water that are usually wasted during spigot adjustment.

Another advantage is that the faucet area remains cleaner and more  sanitary because there are no wet dripping hands to operate the faucet spigots or lever.

A water saving sink aerator faucet serves the following purposes:

  • Prevent splashing
  • Shaping the water stream coming out of the faucet spout
  • Water conservation and reduction in energy costs
  • Quick and easy access to water without adjusting pressure and temperature each time
  • Reducing faucet noise
  • To increase the perceived water pressure (useful in homes with low water pressure)

Water conservation and energy reduction with a sink aerator faucet

Because the aerator limits the water flow through the faucet, water use is reduced as compared to the same time of flow without an aerator. In the case of hot water, because less water is used, less heat energy is used too.

Perceived water pressure with a sink aerator faucet

The perception of water pressure is actually the speed of the water as it hits a surface, (eg: your hands). When an aerator is added to the faucet, there is a region of high pressure created behind the aerator. Because of the higher pressure behind the aerator and the low pressure in front of it (outside the faucet), there is an increase in velocity of the fluid flow.

Touch operated valve on a sink aerator faucet

This finger touch operated water valve switches the water on and off right at the faucet outlet, providing quick water access without the need to adjust the spigots or lever each time. This provides consistent water pressure and temperature every time you use the faucet. It also reduces the amount of water wasted during spigot adjustment.

Browse our water saving sink aerator faucet:

Dual flush toilet kit – Easy to fit, start saving today

Water conservation at home is becoming a more important issue all the time and it has been proven that toilets waste more water than any other home appliances. The WaterSaver dual flush toilet kit is a conversion system. It will help you save water by retrofitting your existing toilet. Once fitted to your toilet the dual flush toilet kit allows you to select either a small flush (for number one) or a regular flush (for number two). Both the small flush and the regular flush are enough to fully cycle and empty the bowl.

With one of our dual flush toilet kits you can easily convert your existing toilet into a water-saving dual flush toilet in as little as 15 minutes (Watch our video and read FAQ’s on how to install a dual flush toilet kit). We stock universal dual flush toilet conversion kits to fit most types and brands of toilets. We also have this handy tool to help you choose the type of dual flush toilet conversion kit you need. We also offer packs of three so that you can convert all of the toilets in your home to dual flush water saving technology.

 

How to install a WaterSaver dual flush toilet kit – EasyFit drop in installation

 

Some benefits of using WaterSaver dual flush toilet kit

  • Use less water, save money and do your part for the environment
  • Quality parts and seals lasts for many years
  • 12 month Warranty of all products
  • Fully adjustable full flush and small flush
  • Can be retrofitted to almost any toilet
  • Converts your existing toilet to Dual Flush Technology
  • Automatically saves water
  • Precise and powerful flushing action
  • Fully adjustable for a wide range of settings
  • EasyFit drop-in installation, no tank removal or mess

 

How much water and money can I save using a dual flush toilet kit?

In most households, the toilets use more water than any other appliance including the shower, dishwasher or clothes washer. An average family of 4 can save over 10,000 gallons per year with dual-flush and depending on the local water rates, can easily pay for the conversion kit in a couple of months of savings off the utility bill.

 

Browse our dual flush toilet kit products:

Toto Dual-Flush Toilets

Toto Dual-Flush Toilets | Conservation and Elegant Design At It’s Finest


Toto Dual-Flush Toilets are simply beautiful. Toto has an unwavering dedication to Universal Design by taking into account people of all ages and abilities, so that their bathroom experience is elegant, accessible and user-friendly every time.

The Dual-Max flushing system is a great example of Toto’s industry leadership, featuring a balanced approach in the design of the bowl and trapway, coupled with an advanced flushing system. The system lets you choose between 0.9 or 1.6 gallons per flush depending on the amount which fits your needs. This sensible approach to water usage reduces your average consumption to 1.13 gallons per day.

Dual-Max flushing system

A large variety of Toto Dual-Flush Toilets employ this proprietary system which offers the following features:

• Integrated control
• An advanced flushing mechanism
• The choice between 0.9 GPF to 1.6 GPF
• Optimization of your water consumption

WaterSense®

Toto has partnered with the U.S. Environmental Protection Agency (EPA) to make it easier to save water and protect the environment by identifying high efficiency products that perform well. The WaterSense® label was created to encourage manufactures to produce water-efficient plumbing fixtures and to develop a system to help consumers recognize these products which have been performance tested and validated by several agencies.

The EPA’s WaterSense® label identifies toilets that:

• Qualify as High Efficiency Toilets (1.28gpf or less).
• Have a minimum soybean paste flush score of 350 uncased grams.
• Meet the Los Angeles Department of Water and Power Supplementary Pricing Specification regarding trim quality and tank volume.
• Have third party testing agencies conducting product performance testing and validation.

As members of the EPA’s WaterSense® Steering Committee, Toto water efficiency specialists advised the EPA on developing product performance criteria for the WaterSense® program. Toto products are recognized as part of the EPA’s National Environmental Achievement Track, the “gold standard” for facility-based environmental performance, recognizing environmental excellence by encouraging facilities with strong environmental records to go above and beyond legal requirements. Toto is also a partner in the EPA’s innovative collaboration with the freight industry to increase energy efficiency while significantly reducing greenhouse gases and air pollution.